|
!!!!!!!!!!!!
NEW !!!!!!!!!!!!
GLOBAL/
UZI "Style" RECEIVERS:
Mouse Click here
for regular prices
by
D and D
Sales:
NEW
MOD A: UZI RECEIVER
 
"READY TO WELD"
"FFL REQUIRED
FOR PURCHASE OF RECEIVERS"
____________________________________
____________________________________
ALL:
UZI PARTS KITS
WELD UP PARTS KITS:
RECEIVER PARTS KITS
!!!!!!!!!!!! NEW
!!!!!!!!!!!!
NITROCELLULOUSE GUN COATING:
DRIES IN 15 MINUTES
No baking required
SPECIFICATIONS:
1.
Tack
Dry-------------------------------15 min
2.
Fully Dry-------------------------------1 hour
3.
Recoat-------------------------------Anytime
4.
Adhesion-------------------------Very
Good
5.
Abrasion--------------------------Very
Good
6.
Corrosion-------------------------Very
Good
1.
Bonds to
aluminum
or
steel
2.
No baking required:
3.
Ready for assembly in 1 (one) hour.
4.
1 hr -
Very High Resistance to gasoline and oil.
5. Paint Receiver, individual parts, and
barrel.
a. Thin
coating allows painting inside the
receiver and all other gun parts.
1. Use
single coat on internal parts or 2 light
coats to allow
free operation of parts.
b. Use multiple thin coats for best results, where
binding of parts is not a concern.
6.
Post application temperature tolerance 250 degrees.
7.
For optimum bonding sand blast before painting or sand
and clean with course steel wool and clean with lacquer
thinner before painting.
8.
IF SAND BLASTING IS NOT POSSIBLE: CLEAN WITH course
steel wool and Acid wash with DILUTE muratic acid (HCL
hydrochloric acid), (Pool acid). Dilute to 1/5; (Some
bubbling will occur; remove after 15 minutes.
CAUTION:
Do not breath fumes and use Rubber
Gloves.
Very hazardous if
inhaled!
FLUSH
THOROUGHLY WITH WATER AND THEN FLUSH WITH LACQUER
THINNER & DRY COMPLETELY "JUST BEFORE COATING".
CAUTION:
"DO NOT" USE
LACQUER THINNER NEAR WATER HEATER OR ANY PILOT LIGHT OR
OPEN FLAME.
Available in 2 Colors:
1.
PARKERIZED
BLACK-----------------------------------------$11.99
2. UZI POWDER COAT BLACK-----"Coming
soon"--------$11.99
TRADEMARK: 2010 / COPYRIGHT 2010
D and D Sales &
Manufacturing
UZI STRIKER
ASSEMBLIES:
US Manufactured
Hammer/Firing pin/
Striker assemblies
Mod A or B:
Regular price:
$49.99
___________________________________
UZI BOLTS
UZI BOLT "ONLY" (SEMI
AUTO)
9mm SOLD
OUT
or
45 ACP IN
STOCK
Mouse
Click Here for Prices:
UZI MAGAZINES
MOUSE CLICK HERE:
IMI
&
USA Magazines INC
UZI STOCKS:
"MOUSE CLICK HERE"
Meet your BATF legal post
ban assembly parts count and avoid 5 years felony
conviction, fines and attorney's fees.
Email to dandsales@aol.com
While Supplies Last!
|
PISTOL GRIP ASSEMBLY, (SEMI AUTO)